Q. Write an 8085 program and draw a flowchart to Subtract two 8-bit numbers along with considering the borrow.(8085 Microprocessor Program)
Flowchart/Algorithm
Program
Address | Mnemonics | Operand | Opcode | Comments |
2000 | LXI | H, 3000H | 21 | Load H-L pair with address 3000H. |
2001 | 00 | |||
2002 | 30 | |||
2003 | MOV | A, M | 7E | Move the 1st operand from memory to reg. A. |
2004 | INX | H | 23 | Increment H-L pair. |
2005 | MOV | B, M | 46 | Move the 2nd operand from memory to reg. B. |
2006 | MVI | C, 00H | 0E | Initialize reg. C with 00H. |
2007 | 00 | |||
2008 | SUB | B | 90 | Subtract B from A. |
2009 | JNC | 200D | D2 | Jump to address 200DH if there is no borrow. |
200A | 0D | |||
200B | 20 | |||
200C | INR | C | 0C | Increment reg. C. |
200D | INX | H | 23 | Increment H-L pair. |
200E | MOV | M, A | 77 | Move the result from reg. A to memory. |
200F | INX | H | 23 | Increment H-L pair. |
2010 | MOV | M, C | 71 | Move borrow from reg. C to memory. |
2011 | HLT | 76 | Halt |
Output
Before Execution:
3000H: 05H
3001H: 02H
After Execution:
3002H: 03H
3003H: 00H
Program Explanation
- This program subtracts two operands stored in memory location 3000H and 3001H, along with considering the borrow took (if any).
- Let us assume that the operands stored at memory location 3000H is 05H and 3001H is 02H.
- Initially, H-L pair is loaded with the address of first memory location.
- The first operand is moved to accumulator from memory location 3000H and H-L pair is incremented to point to next memory location.
- The second operand is moved to register B from memory location 3001H.
- Register C is initialized to 00H. It stores the borrow (if any).
- The two operands stored in register A and B are subtracted and the result is stored in the accumulator.
- Then, carry flag is checked for borrow. If there is a borrow, C register is incremented.
- H-L pair is incremented and the result is moved from the accumulator to memory location 3002H.
- H-L pair is again incremented and borrow (either 0 or 1) is moved from register C to memory location 3003H.
write a program to subtractoin two 8-bit number in microprocessor.
what is the need of in crementing the hl pair last & last but 1st tym?
First HL increment is used for calling second number. Last 2 HL increments used to store results i.e. one for subtraction result at address 3002H and other for borrow at 3003H.
i guess there is a mistake in flow chart